Worms & Worm Gear

  • Worm outside diameters up to 6″ with a 5/8″   minimum and worm lengths up to 12″.
  • Integral shaft or shell type with ground or  unground, plain, splined, or keyed bore.
  • Ground or milled finishes.
  • Heat treated or non-heat treated.
  • All types in single or multiple thread Worms  from 1 circular pitch or as fine as 20 Ax. D.P.
  • Worms as coarse as 1 circular pitch or as fine as 20 Ax. D.P.
  • Worm gears from 1"  to  24″ O.D.
   

Bevel Gears

  • Straight teeth coniflex or conventional bearing.
  • Pitches from 2.5  to  64DP
  • Face widths up to 3.5 "
  • Ferrous or nonferrous materials including steel,    hardened steel, stainless steel, cast iron and   bronze.
  • Integral shafts, ground or unground, can be splined, threaded or keyed.
  • Gear sets run at any angle.
  • Heat treated or non-heat treated.
  • Mitre Gears
  
   

Spurs & Helicals

  • Internal or external
  • From 24" max to .250" min external diameter .
  • From 15" max to .125" min internal diameter.
  • Right or left hand helix angles in all sizes.
  • Guideless helical shaping.
  • Crown hobbing.
  • Shaved or unshaved teeth.
  •   Ferrous or nonferrous materials, including bronze.
  • Heat treated or non-heat treated.
  • Large or small quantity runs.
  • 3DP-120DP
  • AGMA Class 12